NF-Crazy Hotend, RTV6 Heatbreak for Revo hot end DIY modification
1. Supports installation of V6 type nozzles (materials: hardened steel, brass, copper, silicon carbide)
2. Supports installation of CHT V6 nozzles for increased flow





Price range: $ 16.25 through $ 45.00
Price range: $ 14.63 through $ 40.50
1. Conductive heat sinks are reduced by 85% compared to threaded heat breaks. Low thermal conductivity reduces the need for large heat sinks.
2. Small in size, but with a sturdy construction, only one hand can be used to tighten the nozzle.
3. The hot block nickel plating can reduce the wear of the thread and the oxidation of the hot block. The copper heat block can not soften at 550 C high temperature and has good thermal conductivity.
4. Suitable for almost any FFF/FDM printer, can use a very simple installation solution.
5.It can save 20% time compared to other hot ends, and the working temperature can reach 450 C, which meets the needs of printing engineering plastics.
SF is suitable for use with small flow nozzles such as 0.2MM-0.4MM.
HF is a Magnum version similar to the volcano hot end, suitable for large flow nozzles such as 0.6MM-0.8MM, Support for faster printing
NF-Crazy Hotend, RTV6 Heatbreak for Revo hot end DIY modification
1. Supports installation of V6 type nozzles (materials: hardened steel, brass, copper, silicon carbide)
2. Supports installation of CHT V6 nozzles for increased flow





| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Model: No selection | 104GT-2 104NT-4 24v 50W-6*18mm, NF-Crazy ALU HF, NF-Crazy ALU HF VOL, NF-Crazy ALU SF, NF-Crazy ALU SF VOL, NF-Crazy CO HF, NF-Crazy CO HF VOL, NF-Crazy CO SF, NF-Crazy CO SF VOL, NF-Crazy V2 HF Heatbreak, NF-Crazy V2 SF Heatbreak, PT1000-3*15mm 24V 50W-6-18mm |