Product

Mellow Fly-SB2040 V3 Board For Voron 2.4 R2 Trident Stealthburner

Mellow Fly-SB2040 V3 Board For Voron 2.4 R2 Trident Stealthburner

26.80 AUD

The SB2040 board design was inspired by hartk1213; thanks for his contribution to the Voron community, which can be found at: https://github.com/hartk1213/MISC/tree/main/PCBs/Stealthburner_Toolhead_PCB# stealthburner-toolhead-board
The SB2040 V3 board utilises CAN/RS232 communication to connect the upper computer to the UTOC/UTOR board, enabling communication with the SB2040 through the UTOC/UTOR.
For the SB2040 board, it is recommended to choose the FLY-UTOC-1 Board because connecting most of the upper computer and the main board via USB is enough, so there is no need to use Can communication.
Reference URL:
Kliiper refers to this URL:
https://mellow.klipper.cn/#/board/fly_sb2040_v3_pro/README RRF refers to this URL: http://teamgloomy.github.io/fly_sb2040_max_v3_general.htmlhttps://teamgloomy.github.io/fly_sb2040_pro_max_v3_general.html
Product  Features
  • Supports CAN bus connection for stable data transmission with minimal latency and longer distances.
  • CAN bus is compatible with all devices capable of running Linux, such as Raspberry Pi.
  • Added support for RS232 connection, offering even more stable data transmission with minimal latency and longer distances, reducing disconnections.
  • Onboard TMC2209/TMC2240 drivers for extruders.
  • Integrated LIS2DW accelerometer.
  • Added support for switching between 4.7K resistors (for NTC thermistors) or 1K resistors (for PT1000 sensors).
  • Replaced MX3.0 terminals with new connectors supporting 15A current, peaking at 30A.
  • LIS2DW's INT1 and INT2 pins are connected to the microcontroller for user-level calibration.
  • Rated 5A heating rod port.
  • High voltage input limitations.
  • Upgraded to a 3m CAN connection cable to prevent signal loss due to improper terminal crimping.
  • Added support for MAX31865 version, originally only supporting PT100 sensors, now also supporting PT1000 sensors for higher requirements.
  • Added 8-bit DIP switch for easier configuration without needing jumpers or soldering.
  • Added two switches for toggling between RRF and Klipper CAN, Klipper CAN and RS232.
  • Added fan board switch for toggling between DC and PWM fans, enhancing customer convenience.
  • Added CAN interface for customer expansion with CAN modules.
  • Max version adds 1612 chip for RRF fast scanning

Product parameters

Product Name: SB2040 V3 Board / SB2040Pro V3 Board Product Use: Connects Klipper expansion devices via CAN bus/RS232 Product Type: Voron 2.4 R2 Trident Invisible Burner Print Head Communication Method: CANBUS/USB/RS232

MIG-6241