Free Upgrade to Express Shipping on all products within Australia

Sale
  • Bigtreetech EZ Drive Easy Driver EZ2209 EZ5160 Pro For SKR 3 EZ Control Board
  • Bigtreetech EZ Drive Easy Driver EZ2209 EZ5160 Pro For SKR 3 EZ Control Board

Bigtreetech EZ Drive Easy Driver EZ2209 EZ5160 Pro For SKR 3 EZ Control Board

$7.90$30.15

or
SKU: 1050000054 Categories: , Tag:
Bigtreetech EZ Drive Easy Driver EZ2209 EZ5160 Pro For SKR 3 EZ Control Board Bigtreetech EZ Drive Easy Driv...

$7.90$30.15

Select options

EZ2209 pluggable stepper motor drive modules designed by our company, with excellent performance, convenient plugging and unplugging, beautiful and practical.

EZ5160 Pro is a high-power stepper motor drive control chip, with an external MOSFET, its maximum voltage can reach 48V, thus the supported stepper motor range is wider, and the adaptability is higher.

Series Driver Features

  1. StealthChop can realize the mute lock of the motor and the mute when running at low speed. It is recommended to select it when the maximum speed of the motor is lower than 300RPM;
  2. SpreadCycle can achieve quietness and low power consumption in a wide range of speed and torque. It is recommended to select it when the maximum speed of the motor exceeds 300RPM;
  3. StallGuard2™: It can be used for motor stall detection when there is no limit switch (limit switch is recommended);
  4. The newly developed board frame is used to match the new connector, so that customers can experience the aesthetic feeling and avoid the accident that the old driver pin hurts the hand;
  5. Adopt a new type of customized heat sink to enhance the heat dissipation capacity while protecting the driver chip from external damage;
  6. While adopting the environmentally friendly packaging method, the cost performance of the product is improved

EZ5160 Pro Features

  1. With the external MOSFET, it can support higher voltage and larger current, and the maximum current can reach 8A (because the module is limited by size and connector, the current cannot exceed 3A);
  2. Ultra-quiet mode;
  3. Low heat generation, which is far lower than that of 2100, 2130, and other drivers;
  4. It can prevent the motor from shaking;
  5. Not easy to lose steps;
  6. Can drive 57 stepper motors;
  7. The newly developed board frame is used to match the new connector so that customers can experience the aesthetic feeling and avoid the accident of the old driving pin stabbing the hand;
  8.  Using a new type of specially made heat sink to enhance the heat dissipation as well as protect the driver chip from external damage;
  9. Using the environmentally friendly packaging to improve the cost-effectiveness.

Cautions

1.Be sure to disconnect the power supply before installing the driver to prevent the driver from burning;
2.Before installing the driver, be sure to confirm the direction of the driver to prevent the driver from not working due to reverse connection;
3.Please do not plug and unplug the drive module with power on, so as not to cause damage;
4.Our company has installed the heat sink before leaving the factory. Please do not remove the heat sink easily. If there is no thermal conductive material, the heat dissipation effect will be reduced.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Satisfied Customers Let’s Look Reviews

Raven3DTech went above and beyond, they were onsite to assist with any issues and solved immediately. They sent the item out that afternoon to ensure I get the package without delay. Highly recommended site with genuine customer care. Thanks guys

Stephen Lucas Australia
Really good cusomter service and quality products!

Raven3d is literally your one-stop shop for any 3d printing-related needs. The owner is very knowledgeable about the things that you might need for your setup because he also occasionally builds printers for customers and you can also ask him if you want a finished printer. Shipping is also very fast. I am extremely happy with their service. Don't hesitate to buy from them especially if you're in Australia of course. Which I am not but still I buy my parts from them. 😉

Lance Reyes Romero Philippines

Outstanding customer service and support and the prices are comparable with overseas vendors.
I'll buy from Raven over others due to the past and continued service I receive.

Jim Pizzey Australia

“As described and better than expected regarding packing/shipping and product presentation. Highly recommended.”

HECTOR L

“The quality is super. I have been waiting for the Goliath to come out for a long time. the packaging is also at the level.

KRISSY

“Exactly as described. Reached me a full week ahead of the delivery estimate. Super fast shipping!”

RICARDA B.

Recommended