Product
High Transparency PTFE Tube 10m for MMU2.0 / Bowden Extruder - 1.75mm Filament, ID 2mm OD 4mm

17.03 AUD
Disclaimer: We strive to choose better materials, better materials, and more accurate pipe diameters. A smooth internal space will more effectively reduce the frictional resistance of the fine threads inside the pipe. The semi transparent pipeline will allow our customers to clearly see the movement of materials through the pipeline. Helps to calibrate and use 3D printers more accurately. The newly upgraded semi transparent material is more suitable for use with 3D printers
SIZE:Inside: 2mm outside diameter: 4mm
Color: Transparent
Performance:
High temperature (200), low temperature (-196), corrosion resistance, climate, Gao Runhua, no adhesion, no poison
Package included:
PTFE Teflon Tube for 1.75 mm Filament (Number of purchases)
NOTE:
If using TPU, it will take 3mm
Specifications
- 2 mm inside and 4 mm outside, for 1.75 mm filament.
- 10 m length, so you can cut several Bowden or feed tubes from it.
- Translucent, so you can see the filament moving and spot a jam.
- Smooth inner wall for low friction.
Tips
- Cut the ends square with a sharp tube cutter. An angled cut leaves a gap where filament can catch.
- Push the tube fully into each fitting before you tighten or clip it.
- Keep bends gentle. Tight bends add friction and can cause under-extrusion.
- PTFE should not sit in the hot zone above about 240 °C. On an all-metal hotend it stops before the heat break.









5050812034